ELECTRICAL KEY OSCILLATOR (for Rear Floor) REMOVAL


  1. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A0160U2E01

      Disengage the 2 front hooks of the rear seat cushion assembly from the vehicle body.

      Note

      Follow the instructions below carefully as the cushion frame deforms easily.


      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

      2. Repeat for the other hook.

    2. Disengage the 2 rear hooks of the seat cushion from the child restraint seat anchor bracket.

    3. Remove the rear seat cushion assembly.

  2. REMOVE NO. 3 ROOM PARTITION PAD


    1. A0163IG

      Remove the clip and the No. 3 room partition pad.

  3. REMOVE ELECTRICAL KEY OSCILLATOR


    1. A0161H0

      Remove the 2 clips.

    2. A01632Q

      Disconnect the connector.

    3. Remove the 2 bolts and the electrical key oscillator.