WIRELESS DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS

Tech Tips

The following items can be customized.

Note


  • When the customer requests a change in a function, first make sure that customization of the function(s) is possible.

  • Be sure to record the current settings before customizing.

  • When troubleshooting a function, first make sure that the function is not set to OFF.


  1. CUSTOMIZE


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the tester on.

    4. Enter the following menus: Customize.

    5. Select the setting by referring to the table below.

    Wireless Door Lock
    Item (Display) Default Contents Setting

    Wireless Control

    (Wireless door lock control function)

    		 ON This function turns the wireless door lock function on or off. ON/OFF

    Hazard Answer Back

    (Hazard answer-back for wireless door lock operation)

    		 ON

    When LOCK is pressed, all hazard warning lights flash once.

    When UNLOCK is pressed, all hazard warning lights flash twice.

    		 ON/OFF
    Open Door Warning ON If a door is not completely closed and LOCK is pressed, this function sounds a buzzer for 10 seconds. ON/OFF
    Auto Lock Time 30 s This function controls the amount of time from unlocking doors to automatic re-locking. 30 s/60 s/120 s

    Trunk Lid Operation

    (Wireless luggage compartment door open function setting)

    		 0.8 s

    This function changes operation method of transmitter to open luggage compartment door.

    1TIME ON: Push once

    2TIMES ON: Push twice

    0.8 PR: Push for longer than 0.8 seconds

    OFF: Does not operate

    		 1TIME ON/2TIMES ON/0.8 PR/OFF