WIRELESS DOOR LOCK CONTROL SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips


  • Use the following procedure to troubleshoot the theft deterrent system.

  • *: Use the intelligent tester.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. CUSTOMER PROBLEM ANALYSIS


    1. Interview the customer to confirm the problem Click here.


      NEXT

  3. INSPECT COMMUNICATION FUNCTION OF MULTIPLEX COMMUNICATION SYSTEM (BEAN)*


    1. Use the intelligent tester to check for normal function of the multiplex communication system.


      1. (ECU unconnected, communication line malfunctioning) If no code is output, proceed to A.

      2. (ECU unconnected, communication line malfunctioning) If any code is output, proceed to B.


      B

      GO TO MULTIPLEX COMMUNICATION SECTION
      A

  4. SYMPTOM SIMULATION


    NEXT

  5. PROBLEM SYMPTOMS TABLE


    1. If the fault is not listed on the problem symptoms table, proceed to A.

    2. If the fault is listed on the problem symptoms table, proceed to B.


      B

      Go to step 7
      A

  6. PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM


    1. Terminals of ECU Click here

    2. Data List / Active Test Click here

  7. ADJUST, REPAIR OR REPLACE


    NEXT

  8. CONFIRMATION TEST


    NEXT
    END