POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Door Lock / Utility / Customize Setting.

    5. Select the setting by referring to the table below.

      Door Lock
      Display Default Content Setting
      Unlock Key Twice

      OFF

      ON*

      		 Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. ON/OFF
      Auto Lock ON Function that locks all doors when the vehicle speed reaches a certain level. ON/OFF
      Auto Lock/Shift OFF With the engine running and all doors closed, function that locks all doors when the shift lever is moved from P to any position other than P. ON/OFF
      Auto Unlock/Shift OFF Function that unlocks all doors when the shift lever is moved to P from any position other than P while the engine switch is on (IG). ON/OFF
      All Unlock/Open-Close OFF Function that unlocks the other doors when the driver side door is opened within 10 seconds after the engine switch is turned off. ON/OFF

      *: w/o Double Locking System