ULTRASONIC SENSOR (for Rear Side) INSTALLATION


  1. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER (for Corner Sensor)


    1. A01629WE01
      Text in Illustration
      *a Slit
      *b Keyhole

      Engage the 4 claws and install the No. 3 ultrasonic sensor retainer to the rear bumper assembly.

      Tech Tips


      • When installing the retainer, align the keyhole and slit as shown in the illustration.

      • The illustration is for the LH side. The orientation for the RH side is the same as the LH side.

  2. INSTALL NO. 1 ULTRASONIC SENSOR (for Corner Sensor)


    1. A01634J

      Engage the claw and install the ultrasonic sensor clip.

      Tech Tips

      The illustration is for the LH side. The orientation for the RH side is the same as the LH side.

    2. A0162ZB

      Engage the 2 claws and install the No. 1 ultrasonic sensor.

      Tech Tips

      The illustration is for the LH side. The orientation for the RH side is the same as the LH side.

    3. Connect the sensor connector.

  3. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER (for Back Sensor)


    1. A01629WE01
      Text in Illustration
      *a Slit
      *b Keyhole

      Engage the 4 claws and install the No. 3 ultrasonic sensor retainer to the rear bumper assembly.

      Tech Tips


      • When installing the retainer, align the keyhole and slit as shown in the illustration.

      • The illustration is for the LH side. The orientation for the RH side is the same as the LH side.

  4. INSTALL NO. 2 ULTRASONIC SENSOR (for Back Sensor)


    1. A0162B6

      Engage the claw and install the ultrasonic sensor clip.

      Tech Tips

      The illustration is for the LH side. The orientation for the RH side is the same as the LH side.

    2. A0162ZB

      Engage the 2 claws and install the No. 2 ultrasonic sensor.

      Tech Tips

      The illustration is for the LH side. The orientation for the RH side is the same as the LH side.

    3. Connect the sensor connector.

  5. INSTALL REAR BUMPER ASSEMBLY

    Click here