CLEARANCE WARNING BUZZER INSTALLATION


  1. INSTALL CLEARANCE WARNING BUZZER


    1. Engage the clamp and install the clearance warning buzzer.

    2. Connect the connector.

  2. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH DISPLAY


    1. Connect each connector.

    2. Install the the multi-media module receiver assembly with display with the 4 bolts.

  3. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL


    1. A0160J3

      Engage the 4 claws to install the center lower instrument cluster finish panel.

  4. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A015Z29

      for LHD:


      1. Connect the connector.

    2. A0160I2

      for RHD:


      1. Connect the connector.

      2. Engage the 3 clamps.

    3. A0162RW

      Engage the 11 claws to install the No. 3 instrument panel register assembly.

  5. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray)


    1. A0161X0E01

      Connect the connectors.

    2. Insert the protruding parts of the front ash receptacle box sub-assembly into the 2 guide holes as shown in the illustration.

    3. A0161L2

      Install the front ash receptacle box sub-assembly with the 2 screws <E>.

  6. INSTALL INSTRUMENT PANEL BOX ASSEMBLY (w/o Ashtray)


    1. A015YMFE02

      Connect the connectors.

    2. Insert the protruding parts of the instrument panel box assembly into 2 guide holes as shown in the illustration.

    3. A015YUI

      Install the instrument panel box assembly with the 2 screws <E>.

  7. INSTALL CONSOLE PANEL SUB-ASSEMBLY


    1. A0162AI

      Connect the connectors.

    2. Engage the 8 clips to install the console panel sub-assembly.

  8. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH


    1. A0163A0

      Engage the claw and 2 clips to install the upper No. 2 console panel garnish as shown in the illustration.

  9. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH


    1. A01626T

      Engage the claw and 2 clips to install the upper No. 1 console panel garnish as shown in the illustration.

  10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A015ZOR

      Turn the shift lever knob clockwise and install the shift lever knob sub-assembly.

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  12. ADJUST CLOCK