CLEARANCE WARNING BUZZER INSTALLATION


  1. INSTALL CLEARANCE WARNING BUZZER (for LHD)


    1. A015ZP5

      Engage the clamp and install the clearance warning buzzer.

    2. Connect the connector.

  2. INSTALL CLEARANCE WARNING BUZZER (for RHD)


    1. A015ZPX

      Engage the clamp and install the clearance warning buzzer.

    2. Connect the connector.

  3. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)


    1. Connect each connector.

    2. A015ZQC

      Install the integration control panel with radio receiver assembly with the 4 bolts.

  4. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)


    1. Connect each connector.

    2. A0162FS

      Install the the multi-display with radio receiver assembly with the 4 bolts.

  5. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL


    1. A0160YT

      Engage the 4 claws and install the center lower instrument cluster finish panel.

  6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A0160X4

      Connect the connectors.

    2. Engage the 11 claws and install the No. 3 instrument panel register assembly.

  7. INSTALL FRONT ASH RECEPTACLE ASSEMBLY


    1. A0162Y8E02

      Connect the connectors.

    2. Insert the protruding parts of the front ash receptacle assembly into the 2 guide holes as shown in the illustration.

    3. A0160IR

      Install the front ash receptacle assembly with the 2 screws <E>.

  8. INSTALL CONSOLE PANEL SUB-ASSEMBLY


    1. A015ZS3

      Connect the connectors.

    2. Engage the 8 clips and install the console panel sub-assembly.

  9. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH


    1. A0161VR

      Engage the claw and 2 clips, and then install the upper No. 2 console panel garnish.

  10. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH


    1. A0161PI

      Engage the claw and 2 clips, and then install the upper No. 1 console panel garnish.

  11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A0160BL

      Turn the shift lever knob clockwise and install the shift lever knob sub-assembly.

  12. ADJUST CLOCK