CLEARANCE WARNING BUZZER REMOVAL


  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A0161BO

      Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

  2. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH


    1. A016226

      Using a moulding remover, disengage the claw.

    2. A0161ZW

      Pull the upper No. 1 console panel garnish in the direction indicated by the arrow to disengage the 2 clips and remove it.

  3. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH


    1. A015YLQ

      Using a moulding remover, disengage the claw.

    2. A0160CR

      Pull the upper No. 2 console panel garnish in the direction indicated by the arrow to disengage the 2 clips and remove it.

  4. REMOVE CONSOLE PANEL SUB-ASSEMBLY


    1. A0160RU

      Hold the front of the console panel sub-assembly as shown in the illustration and disengage the 8 clips by pulling the console panel sub-assembly in the direction shown by the arrow.

      Note

      Do not use any tools to disengage the clips. The use of tools may result in damage to the console panel sub-assembly.

    2. Disconnect the connectors and remove the console panel sub-assembly.

  5. REMOVE FRONT ASH RECEPTACLE ASSEMBLY


    1. A0160IR

      Remove the 2 screws <E>.

    2. A0160OX

      Pull the front ash receptacle assembly in the direction indicated by the arrow to disconnect the connectors and remove it.

  6. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A0163DOE02

      Using a screwdriver, disengage the 4 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A015ZH6E03

      Apply protective tape to the areas shown in the illustration.

    3. A015ZAL

      Using a moulding remover, disengage the 4 claws starting from the right of the No. 3 instrument panel register assembly. Disengage the remaining 3 claws by pulling the No. 3 instrument panel register assembly by hand.

      Note

      Do not pry the lower part of the No. 3 instrument panel register assembly. Doing so may damage the assembly.

    4. Disconnect the connectors.

  7. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL


    1. A0160YT

      Disengage the 4 claws and remove the center lower instrument cluster finish panel.

  8. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)


    1. A015ZQC

      Remove the 4 bolts.

    2. Pull the integration control panel with radio receiver assembly toward the rear of the vehicle.

    3. Disconnect each connector and remove the panel.

  9. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)


    1. A0162FS

      Remove the 4 bolts.

    2. Pull the multi-display with radio receiver assembly toward the rear of the vehicle.

    3. Disconnect each connector and remove the multi-display.

  10. REMOVE CLEARANCE WARNING BUZZER (for LHD)


    1. Disconnect the connector.

    2. A015ZP5

      Disengage the clamp and remove the clearance warning buzzer.

  11. REMOVE CLEARANCE WARNING BUZZER (for RHD)


    1. Disconnect the connector.

    2. A015ZPX

      Disengage the clamp and remove the clearance warning buzzer.