CLEARANCE WARNING ECU INSTALLATION


  1. INSTALL CLEARANCE WARNING ECU (w/o Pre-crash Safety System)


    1. A015Z7J

      Install the clearance warning ECU with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Connect the connector.

  2. INSTALL CLEARANCE WARNING ECU (w/ Pre-crash Safety System)


    1. A01612TE01

      Install the clearance warning ECU to the seat belt control ECU with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Temporarily install nut A.

    3. A0160ZIE01

      Insert loosely tightened nut A into the hole on the vehicle body (left side of the luggage compartment). Slide down the seat belt control ECU and the clearance warning ECU as a unit to temporarily install them.

    4. Insert the 2 bolts into the holes on the vehicle body and fully tighten the 3 nuts in the order of B, A, and C.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    5. Connect the connectors.

  3. INSTALL SIDE LUGGAGE COMPARTMENT TRIM COVER


    1. A01603B

      Install the side luggage compartment trim cover with the 3 clips.

  4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. A0162LQ

      Install the No. 1 luggage compartment trim hook with the screw.

  5. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. A015Z78

      Engage the 4 claws.

    2. Install the front luggage compartment trim cover with the 2 clips.

  6. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK


    1. A015ZZR

      Install the 3 No. 2 luggage compartment trim hooks as shown in the illustration.

  7. INSTALL ROPE HOOK


    1. A0162EV

      Install the 2 rope hooks.

  8. INSTALL NO. 2 ROOM LIGHT ASSEMBLY


    1. Connect the connector.

    2. A0161YS

      Engage the claw and install the No. 2 room light assembly.

  9. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER


    1. A015ZVT

      Engage the 4 clips.

    2. Install the rear luggage compartment trim cover with the 3 clips.

  10. INSTALL ROPE HOOK ASSEMBLY


    1. A0163BF

      Install the 3 rope hook assemblies with the 3 bolts.

  11. INSTALL DECK SIDE TRIM BOX RH

  12. INSTALL DECK SIDE TRIM BOX LH

  13. INSTALL LUGGAGE COMPARTMENT TRIM COVER

  14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.