CLEARANCE WARNING ECU REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Click here.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE LUGGAGE COMPARTMENT TRIM COVER

  3. REMOVE DECK SIDE TRIM BOX LH

  4. REMOVE DECK SIDE TRIM BOX RH

  5. REMOVE ROPE HOOK ASSEMBLY


    1. A0163BF

      Remove the 3 bolts and 3 rope hook assemblies.

  6. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER


    1. A015ZVT

      Using a clip remover, remove the 3 clips.

    2. Disengage the 4 clips and remove the rear luggage compartment trim cover.

  7. REMOVE NO. 2 ROOM LIGHT ASSEMBLY


    1. A0161YS

      Disengage the claw and disconnect the No. 2 room light assembly.

    2. Disconnect the connector and remove the No. 2 room light assembly.

  8. REMOVE ROPE HOOK


    1. A0162EV

      Remove the 2 rope hooks.

  9. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK


    1. A0163DB

      Remove the 3 No. 2 luggage compartment trim hooks as shown in the illustration.

  10. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. A015Z78

      Using a clip remover, remove the 2 clips.

    2. Disengage the 4 claws and remove the front luggage compartment trim cover.

  11. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. A0162LQ

      Remove the screw and No. 1 luggage compartment trim hook.

  12. REMOVE SIDE LUGGAGE COMPARTMENT TRIM COVER


    1. A01603B

      Using a clip remover, remove the 3 clips and side luggage compartment trim cover.

  13. REMOVE CLEARANCE WARNING ECU (w/o Pre-crash Safety System)


    1. A015Z7J

      Disconnect the connector.

    2. Remove the 2 nuts and clearance warning ECU.

  14. REMOVE CLEARANCE WARNING ECU (w/ Pre-crash Safety System)


    1. A015YTM

      Disconnect the connectors.

    2. Remove the 3 nuts and remove the seat belt control ECU and the clearance warning ECU as a unit.

    3. A0161BA

      Remove the 2 nuts and clearance warning ECU.