ULTRASONIC SENSOR (for Rear Side) REMOVAL


  1. REMOVE LUGGAGE COMPARTMENT TRIM COVER

  2. REMOVE DECK SIDE TRIM BOX LH

  3. REMOVE DECK SIDE TRIM BOX RH

  4. REMOVE ROPE HOOK ASSEMBLY


    1. A0163BF

      Remove the 3 bolts and 3 rope hook assemblies.

  5. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER


    1. A015ZVT

      Using a clip remover, remove the 3 clips.

    2. Disengage the 4 clips and remove the rear luggage compartment trim cover.

  6. REMOVE NO. 2 ROOM LIGHT ASSEMBLY


    1. A0161YS

      Disengage the claw and disconnect the No. 2 room light assembly.

    2. Disconnect the connector and remove the No. 2 room light assembly.

  7. REMOVE ROPE HOOK


    1. A0162EV

      Remove the 2 rope hooks.

  8. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK


    1. A0163DB

      Remove the 3 No. 2 luggage compartment trim hooks as shown in the illustration.

  9. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. A015Z78

      Using a clip remover, remove the 2 clips.

    2. Disengage the 4 claws and remove the front luggage compartment trim cover.

  10. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. A0162LQ

      Remove the screw and No. 1 luggage compartment trim hook.

  11. REMOVE SIDE LUGGAGE COMPARTMENT TRIM COVER


    1. A01603B

      Using a clip remover, remove the 3 clips and side luggage compartment trim cover.

  12. REMOVE NO. 1 REAR BUMPER PLATE


    1. A0163EF

      Using a screwdriver, disengage the 2 claws and remove the No. 1 rear bumper plate.

      Tech Tips


      • Tape the screwdriver tip before use.

      • Use the same procedure for the RH side and LH side.

  13. REMOVE REAR BUMPER ASSEMBLY


    1. A015Z4C

      w/ LEXUS Parking Assist-Sensor System:


      1. Disconnect the No. 3 luggage room wire connector.

    2. A0161AFE01

      Put protective tape around the rear bumper assembly.

    3. Using a clip remover, remove the 2 clips.

    4. Remove the 6 screws and 2 rear bumper seal brackets.

    5. A0160MI

      Disengage the 6 claws and disconnect the rear bumper assembly as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A01619W

      Disengage the 4 claws and remove the rear bumper assembly as shown in the illustration.

    7. A0162V9

      w/ LEXUS Parking Assist-Sensor System:


      1. Disengage the clamp and remove the grommet.

  14. REMOVE NO. 2 ULTRASONIC SENSOR


    1. Disconnect the sensor connector.

    2. A01639G

      Remove the sensor retainer as shown in the illustration.

    3. Remove the No. 2 ultrasonic sensor from the rear bumper.

  15. REMOVE NO. 1 ULTRASONIC SENSOR


    1. Disconnect the sensor connector.

    2. A01606O

      Remove the sensor retainer as shown in the illustration.

    3. Remove the No. 1 ultrasonic sensor from the rear bumper.