ULTRASONIC SENSOR (for Front Side) INSTALLATION


  1. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER


    1. A01629WE01
      Text in Illustration
      *a Slit
      *b Keyhole

      Engage the 4 claws and install the No. 3 ultrasonic sensor retainer to the front bumper assembly.

      Tech Tips


      • When installing the retainer, align the keyhole and slit as shown in the illustration.

      • The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  2. INSTALL NO. 1 ULTRASONIC SENSOR


    1. A0162B6

      Engage the claw and install the ultrasonic sensor clip.

      Tech Tips

      The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

    2. A0162ZB

      Engage the 2 claws and install the No. 1 ultrasonic sensor.

      Tech Tips

      The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

    3. Connect the sensor connector.

  3. INSTALL FRONT BUMPER ASSEMBLY

    Click here