ULTRASONIC SENSOR (for Front Side) REMOVAL


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE NO. 1 ULTRASONIC SENSOR


    1. Disconnect the sensor connector.

    2. A015ZEZ

      Disengage the 2 claws and remove the No. 1 ultrasonic sensor.

      Tech Tips

      The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

    3. A015ZFPE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the ultrasonic sensor clip as shown in the illustration.

      Tech Tips

      The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  3. REMOVE NO. 3 ULTRASONIC SENSOR RETAINER


    1. A015YP7

      Disengage the 4 claws and remove the No. 3 ultrasonic sensor retainer from the front bumper assembly.

      Tech Tips

      The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.