ULTRASONIC SENSOR (for Rear Side) REMOVAL


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE NO. 1 ULTRASONIC SENSOR (for Corner Sensor)


    1. Disconnect the sensor connector.

    2. A015ZEZ

      Disengage the 2 claws and remove the No. 1 ultrasonic sensor.

    3. A0162P2E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the ultrasonic sensor clip as shown in the illustration.

  3. REMOVE NO. 3 ULTRASONIC SENSOR RETAINER (for Corner Sensor)


    1. A015YP7

      Disengage the 4 claws and remove the No. 3 ultrasonic sensor retainer from the rear bumper assembly.

  4. REMOVE NO. 2 ULTRASONIC SENSOR (for Back Sensor)


    1. Disconnect the sensor connector.

    2. A015ZEZ

      Disengage the 2 claws and remove the No. 2 ultrasonic sensor.

    3. A015ZFPE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the ultrasonic sensor clip as shown in the illustration.

  5. REMOVE NO. 3 ULTRASONIC SENSOR RETAINER (for Back Sensor)


    1. A015YP7

      Disengage the 4 claws and remove the No. 3 ultrasonic sensor retainer from the rear bumper assembly.