PARKING ASSIST MONITOR SYSTEM DIAGNOSIS SYSTEM


  1. PARKING ASSIST MONITOR DIAGNOSTIC MODE


    1. The diagnostic mode for parking assist monitor system, signals received by the multi-media module receiver assembly can be checked and the parking assist monitor system can be calibrated, adjusted and checked on the multi-display.

      Note

      Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed Click here.

      Tech Tips

      The displayed items may differ depending on vehicle specifications.

  2. DIAGNOSTIC MODE TRANSITION (DURING PARKING ASSIST MONITOR SYSTEM INITIALIZATION)

    A016153E01
    A0162PP
  3. DIAGNOSTIC MODE TRANSITION (AFTER PARKING ASSIST MONITOR SYSTEM INITIALIZATION)

    A0161QNE01
    A015ZMK
  4. VEHICLE SIGNAL CHECK (NAVIGATION SYSTEM INPUT SIGNALS)


    1. Start diagnostic mode Click here.

    2. A0162TO

      Select "Function Check/Setting" on the "Service Menu" screen to display the "Function Check/Setting I" screen.

    3. A01615I

      Select "Vehicle Signal" on the "Function Check/Setting I" screen.

    4. A01612O

      Vehicle Signal Check Mode


      1. When the "Vehicle Signal Check Mode" screen is displayed, check the item displayed for "REV".

        Tech Tips


        • Only conditions having inputs are displayed.

        • This screen displays vehicle signals input to the multi-media module receiver assembly.

    5. Finish diagnostic mode Click here.

  5. CAR INFORMATION AND CAR SIGNAL CHECK (PARKING ASSIST MONITOR SYSTEM INPUT SIGNALS)


    1. Start diagnostic mode Click here.

    2. A0162TO

      Select "Function Check/Setting" on the "Service Menu" screen to display the "Function Check/Setting I" screen.

    3. A01615I

      Select "Camera Setting" on the "Function Check/Setting I" screen to display "Car Information Check" screen.

    4. A0161GU

      Car Information Check


      1. On the "Car Information Check" screen, it is possible to check the vehicle information.

        Item Detail Note
        DT INFO 2WD/4WD signal input When "CHK" (red) is displayed, selecting "Next" will not change to the next screen.

        Tech Tips


        • If "CHK" (red), "2WD" (red) or "4WD" (red) is displayed, check for DTCs and perform troubleshooting based on the output DTCs Click here.

        • If performing the adjustment after proceeding to the next screen, confirm that all items display "2WD" (blue) or "4WD" (blue) before selecting "Next".

        • After "Next" is selected, the screen transitions differ depending on whether initialization of the parking assist monitor system was performed after the multi-media module receiver assembly was replaced.

          Parking Assist Monitor System Initialization Screen Transition
          Not performed Car Signal Check screen
          Performed Mode Setting screen
    5. A0161GU

      Select "Next" on the "Car Information Check" screen.

    6. A0162FM

      When the screen changes to the "Mode Setting" screen, select "Back Camera Setting" to display the "Car Signal Check" screen.

      Tech Tips

      To select a grayed out item, select and hold the item for 2 seconds or more.

    7. A0161V3

      Car Signal Check


      1. On the "Car Signal Check" screen, it is possible to inspect the state of signals and check the settings.

        Item Inspection Detail Note
        BCTY Luggage compartment door courtesy switch signal input When "CHK" (red) is displayed, selecting "Next" will not change to the next screen.

        Tech Tips


        • If "CHK" (red) is displayed for "BCTY", check for DTCs and perform troubleshooting based on the output DTCs Click here.

        • If performing the adjustment after proceeding to the next screen, confirm that all items display "OK" (blue) before selecting "Next".

    8. Finish diagnostic mode Click here.

  6. CALIBRATION WHEN SERVICING VEHICLE

    Note

    Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed Click here.