This system has a rear television camera assembly mounted on the luggage compartment door to display an image of the area behind the vehicle on the display. The display panel also shows a composite view consisting of the area behind the vehicle and parking guide lines to assist the driver in parking the vehicle by monitoring the area behind the vehicle.
This system consists of the following components:
Rear television camera assembly
Multi-media module receiver assembly
Combination meter assembly
Main body ECU RH (cowl side junction block RH)
Main body ECU LH (cowl side junction block LH)
This system is equipped with a self-diagnosis system, which is operated on a designated window that appears on the display panel, just as in the navigation system.
FUNCTION OF COMPONENTS
The multi-media module receiver assembly controls the system by using information from the following components.
|Rear Television Camera Assembly||
|Multi-media Module Receiver Assembly||
|Multi-display Assembly||Receives the video signals containing a composite of an image of the area behind the vehicle and parking assist guideline signals from the multi-media module receiver assembly, and displays them on the display panel.|
|Steering Sensor||Detects the angle of the steering wheel and transmits the resulting signals to the multi-media module receiver assembly through CAN communication.|
|ECM||Transmits a reverse signal to the main body ECU LH (cowl side junction block LH) through CAN communication and BEAN communication.|
|Combination Meter Assembly||Transmits a vehicle speed signal to the multi-media module receiver assembly.|
|Main Body ECU RH (Cowl Side Junction Block RH)||Transmits a luggage compartment door courtesy switch signal to the multi-media module receiver assembly through CAN communication and BEAN communication.|
|Main Body ECU LH (Cowl Side Junction Block LH)||Transmits a reverse signal to the multi-media module receiver assembly.|
The multi-media module receiver assembly receives the reverse signal when the engine switch is on (IG) and the shift lever is moved to R. After receiving the reverse signal, the multi-display switches to the parking assist monitor system.
DISPLAY MODE SETTING
|*a||Display mode switch screen button||*b||Estimated course line display mode|
|*c||Parking assist guide line display mode||*d||Distance guide line display mode|
|*e||Display mode switch screen button pressed||-||-|
While the parking assist monitor is displayed on the multi-display, pressing the display mode switch screen button switches the parking assist monitor display mode.
|Parking assist monitor display mode||
Distance guide lines
Distance guide line
Vehicle width extension guide line
Estimated course lines
Parking assist guide lines
|Estimated course line display mode||Displayed||Displayed||Displayed||Displayed||Not displayed|
|Parking assist guide line display mode||Displayed||Not displayed||Displayed||Not displayed||Displayed|
|Distance guide line display mode||Displayed||Not displayed||Not displayed||Not displayed||Not displayed|
DIAGNOSTIC FUNCTION OUTLINE
The parking assist monitor system has a diagnostic function displayed on the multi-display assembly. This function enables calibration (adjustment and verification) of the parking assist monitor system Click here.
The following items for the parking assist monitor system can be checked using the intelligent tester.