PARKING ASSIST MONITOR SYSTEM, Diagnostic DTC:C1626

DTC Code DTC Name
C1626 Steering Angle Sensor Failure

DESCRIPTION

This DTC is stored if the parking assist ECU receives a signal via CAN communication from the steering angle sensor that indicates an internal malfunction.

DTC No. DTC Detection Condition Trouble Area
C1626 A fail flag is transmitted from the steering angle sensor.

  • Steering angle sensor

  • Parking assist ECU

INSPECTION PROCEDURE

Note


  • When "System initializing" message is displayed on the navigation display after the battery terminal is disconnected, correct the steering angle neutral point Click here.

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed Click here.

PROCEDURE


  1. REPLACE STEERING ANGLE SENSOR


    1. Replace the steering angle sensor Click here.


    NEXT

  2. CHECK DTC OUTPUT


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC C1626 is output A
      No DTC is output B

    B

    END

    A

    REPLACE PARKING ASSIST ECU Click here