MULTIPLEX TILT AND TELESCOPIC ECU INSTALLATION


  1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU


    1. A016331

      Install the multiplex tilt and telescopic ECU with the 2 screws.

      Torque:
      1.5 N*m  { 15 kgf*cm, 13 in.*lbf }
    2. A0160VI

      Connect the connector to the multiplex tilt and telescopic ECU.

      Note


      • The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape.

      • When installing them, connect the connectors of the same color.

  2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY


    1. A0161P3

      Temporarily install the steering lock actuator assembly to the steering column assembly with 2 new tapered-head bolts.

    2. Tighten the 2 tapered-head bolts until the bolt heads break off.

  3. INSTALL STEERING COLUMN ASSEMBLY

    Tech Tips

    Refer to the instructions for Installation of the steering column assembly Click here.