MULTIPLEX TILT AND TELESCOPIC ECU REMOVAL


  1. REMOVE STEERING COLUMN ASSEMBLY

    Tech Tips

    Refer to the instructions for Removal of the steering column assembly Click here.

  2. REMOVE STEERING LOCK ACTUATOR ASSEMBLY


    1. Using a center punch, mark the center of the 2 tapered-head bolts.

    2. Using a 3 to 4 mm (0.118 to 0.157 in.) diameter drill bit, drill a hole in the each tapered-head bolt.

    3. A015ZNWE05

      Using a screw extractor, remove the each tapered-head bolt and steering lock actuator assembly from the steering column assembly.

  3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU


    1. A0160VI

      Disconnect the connector from the multiplex tilt and telescopic ECU.

    2. A016331

      Remove the 2 screws and multiplex tilt and telescopic ECU.