STEERING LOCK SYSTEM INITIALIZATION

Tech Tips

In vehicles equipped with the push-button start function, the starting function may not be operational after recharging or while jump-starting a discharged battery. This condition is most likely to occur if battery voltage drops below 9 V. The following procedure has been developed to address this condition.


  1. INITIALIZATION PROCEDURE

    A0162Z4E01

    1. Confirm that the D/C CUT fuse is installed.

      Tech Tips

      If the D/C CUT fuse is not installed, install it at this time.

    2. Move the shift lever to P.

    3. Turn the engine switch off.

    4. Open the driver's door.

      Tech Tips

      Opening the driver's door will start an initialization process between the steering lock ECU and the engine room junction block.

    5. Depress the brake pedal.

    6. Press the engine switch.