STEERING COLUMN ASSEMBLY DISASSEMBLY


  1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY


    1. Using a center punch, mark the center of the 2 tapered-head bolts.

    2. Using a 3 to 4 mm (0.118 to 0.157 in.) diameter drill bit, drill a hole in the each tapered-head bolt.

    3. A015ZNWE05

      Using a screw extractor, remove the each tapered-head bolt and steering lock actuator assembly from the steering column assembly.

  2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU


    1. A0160VI

      Disconnect the connector from the multiplex tilt and telescopic ECU.

    2. A016331

      Remove the 2 screws and multiplex tilt and telescopic ECU.