POWER STEERING SYSTEM DTC CHECK / CLEAR


  1. CHECK FOR DTCS


    1. Turn the engine switch off.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the engine switch on (IG).

    4. Turn the intelligent tester on.

    5. Read the DTCs following the display on the intelligent tester. Enter the following menus: Chassis / EMPS / Trouble Codes.

    6. Refer to the Diagnostic Trouble Code Chart for DTC information Click here.

  2. CLEAR DTCS


    1. Turn the engine switch off.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the engine switch on (IG).

    4. Turn the intelligent tester on.

    5. Clear the DTCs by following the display on the intelligent tester. Enter the following menus: Chassis / EMPS / Trouble Codes.

    6. According to the display on the intelligent tester, select the trouble code data display with the clear button.