POWER STEERING ECU REMOVAL


  1. REMOVE BATTERY


    1. Disconnect the cable from the negative (-) battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

    2. for LHD:


      1. A0162W7

        Disconnect the 2 clamps.

    3. for RHD:


      1. A0163BE

        Disconnect the 2 clamps.

    4. Disconnect the cable from the positive (+) battery terminal.

    5. Remove the nut and the battery clamp.

    6. Remove the battery insulator.

    7. Remove the battery.

  2. REMOVE NO. 1 BATTERY TRAY SUPPORT

  3. REMOVE POWER STEERING ECU ASSEMBLY


    1. Release the locks of the 2 power steering ECU assembly connectors (A) and (B).

      A01625SE01

    2. Disconnect the connectors (A), (B) and (C) from the power steering ECU assembly.

    3. A016155

      Remove the 3 bolts.

    4. Remove the power steering ECU assembly.