PARKING BRAKE ASSEMBLY DISASSEMBLY

Tech Tips

When removing the parking brake anchor block sub-assembly, refer to the instructions for Removal of the rear axle carrier sub-assembly Click here.


  1. REMOVE REAR WHEEL

  2. SEPARATE REAR DISC BRAKE CYLINDER ASSEMBLY


    1. A01631D

      Remove the 2 bolts and separate the rear disc brake cylinder assembly.

      Note

      Hang the caliper with wire or equivalent.

  3. REMOVE REAR DISC


    1. A015ZN1E01

      Put matchmarks on the rear disc and rear axle hub.

    2. A0163A5

      Release the parking brake and remove the rear disc.

      Tech Tips

      If the disc cannot be removed easily, turn and press firmly the shoe adjuster until the wheel comes free.

  4. REMOVE NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING


    1. A0162OPE01

      Using SST, remove the No. 2 parking brake shoe return tension spring.

      SST
      09703-30011

  5. REMOVE NO. 1 PARKING BRAKE SHOE RETURN TENSION SPRING


    1. A0160DOE02

      Using SST, remove the No. 1 parking brake shoe return tension spring.

      SST
      09703-30011

  6. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET


    1. A015ZVW

      Spread apart the No. 1 parking brake shoe assembly and No. 2 parking brake shoe assembly, and remove the parking brake shoe adjusting screw set.

  7. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY


    1. A0162W9E02

      Using SST, remove the No. 1 shoe hold down spring cup, No. 1 compression spring and No. 1 shoe hold down spring pin.

      SST
      09718-00011

    2. Remove the No. 1 parking brake shoe assembly.

      Tech Tips

      Use the service hole to retain the No. 1 shoe hold down spring pin.

  8. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY


    1. A0162DWE04

      Using SST, remove the No. 1 shoe hold down spring cup, No. 1 compression spring and No. 1 shoe hold down spring pin.

      SST
      09718-00011

    2. Remove the No. 2 parking brake shoe assembly.

      Tech Tips

      Use the service hole to retain the No. 1 shoe hold down spring pin with your finger.

  9. REMOVE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY


    1. A0160F2

      Remove the parking brake shoe lever sub-assembly.