VSC OFF SWITCH INSPECTION


  1. INSPECT VSC OFF SWITCH


    1. A016183E01
      Text in Illustration
      *1

      Component without harness connected

      (VSC OFF Switch)

      Disconnect the VSC OFF switch connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3 (+) - 4 (E) Switch is pushed in Below 25 Ω
      3 (+) - 4 (E) Switch is not pushed in 10 kΩ or higher

      If the value is not as specified, replace the VSC OFF switch.