BRAKE PEDAL INSTALLATION


  1. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY (for LHD)


    1. A015ZBA

      Install the brake pedal support assembly with the bolt.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    2. Connect the connector and engage the clamp.

  2. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY (for RHD)


    1. A0160ZT

      Install the brake pedal support assembly with the bolt.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    2. Connect the connector and engage the clamp.

  3. INSTALL STOP LIGHT SWITCH ASSEMBLY


    1. A016128

      Temporarily install the stop light switch assembly with the stop light switch lock nut.

    2. A0161BXE01

      Turn the stop light switch assembly so that the clearance between the nut end and stop light switch cushion is between 0.5 to 2.4 mm (0.020 to 0.095 in.).

    3. Tighten the stop light switch lock nut.

      Torque:
      17 N*m  { 170 kgf*cm, 12 ft.*lbf }
    4. A015ZEYE01

      Connect the connector.

  4. INSTALL BRAKE BOOSTER ASSEMBLY

    Tech Tips

    Refer to the instructions for Installation of the brake booster assembly Click here.