REAR SPEED SENSOR REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

  • If the sensor rotor needs to be replaced, replace it together with the rear axle hub and bearing assembly.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR WHEEL

  3. DISCONNECT REAR SPEED SENSOR WIRE


    1. A01620Z

      Using a screwdriver, disconnect the rear speed sensor wire.

  4. REMOVE REAR SPEED SENSOR


    1. A0160A0

      Remove the bolt and rear speed sensor.

      Note

      Prevent foreign matter from attaching to the sensor tip.