YAW RATE AND ACCELERATION SENSOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE CONSOLE BOX

    Tech Tips

    Refer to the instructions for Removal of the console box Click here.

  3. REMOVE NO. 2 CONSOLE BOX DUCT


    1. A0162NO

      Remove the 2 clips and No. 2 console box duct.

  4. REMOVE YAW RATE AND ACCELERATION SENSOR


    1. A015ZAEE03

      Separate the 2 wire harness clamps.

    2. Remove the 2 bolts and yaw rate and acceleration sensor.

    3. A015ZGD

      Disconnect the yaw rate and acceleration sensor connector.

      Note

      Do not remove the sensor from the bracket.