REAR LOWER ARM REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. REMOVE REAR WHEEL

  2. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR


    1. A0163AZ

      Remove the 2 nuts and No. 2 differential support protector.

  3. REMOVE REAR SUSPENSION MEMBER BRACE


    1. A015YQ6

      Remove the 2 bolts and rear suspension member brace.

  4. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY


    1. A0161UFE02

      Support the rear axle assembly with a jack using a wooden block.

    2. Remove the 2 bolts, 2 nuts, and rear No. 1 suspension arm assembly.

      Note

      Turn the bolts while holding the nuts.

  5. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY


    1. A0163D9E01

      Support the rear axle assembly with a jack using a wooden block.

    2. A015YITE01

      Remove the bolt and nut (C), and separate the rear stabilizer link assembly and the height control sensor link bracket.

    3. Remove the bolt (B) and nut, and separate the rear shock absorber with coil spring.

      Note

      Turn the bolt while holding the nut.

    4. Remove the nut and bolt (A), and separate the rear No. 2 suspension arm assembly.

      Note

      Turn the bolt while holding the nut.

    5. Remove the bolt and nut (D), and remove the rear No. 2 suspension arm assembly.