DIFFERENTIAL MOUNT CUSHION INSTALLATION


  1. INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION


    1. Using SST, install a new rear No. 1 differential mount cushion.

      A0162JAE01
      SST
      09570-24011

      Note


      • Be sure to use the correct combination of SST.

      • Apply a small amount of grease to the threads of SST before use.

      • Temporarily install the rear No. 1 differential mount cushion to the rear suspension member in order to prevent it from tilting and install SST.

      • Make sure that SST contacts the entire circumference of the rear No. 1 differential mount cushion.

      • Do not slant the bolts of SST.

      • Tighten the 2 bolts of SST equally into the 2 holes of the rear No. 1 differential mount cushion.

  2. INSTALL REAR NO. 2 DIFFERENTIAL MOUNT CUSHION


    1. Using SST, install a new rear No. 2 differential mount cushion.

      A016225E01
      SST
      09570-24011

      Note


      • Be sure to use the correct combination of SST.

      • Apply a small amount of grease to the threads of SST before use.

      • Temporarily install the rear No. 2 differential mount cushion to the rear suspension member in order to prevent it from tilting and install SST.

      • Make sure that SST contacts the entire circumference of the rear No. 2 differential mount cushion.

      • Do not slant the bolt of SST.

  3. INSTALL REAR SUSPENSION MEMBER

    Tech Tips

    Refer to the procedure from Install Rear Suspension Member Click here.