REAR AXLE CARRIER INSTALLATION

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. INSTALL REAR AXLE CARRIER SUB-ASSEMBLY


    1. Hold the rear axle carrier sub-assembly between aluminium plates in a vise.

      Note

      Do not overtighten the vise.

    2. A015ZRJE01

      Install the parking brake anchor block, cable support bracket and parking brake plate with the 2 nuts.

      Torque:
      76 N*m  { 775 kgf*cm, 56 ft.*lbf }

  2. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY


    1. Hold the rear axle hub and bearing assembly between aluminium plates in a vise.

      Note

      Do not overtighten the vise.

    2. A015Z5DE01

      Install the rear axle hub and bearing assembly to the rear axle carrier sub-assembly with the 4 bolts.

      Torque:
      70 N*m  { 714 kgf*cm, 52 ft.*lbf }

  3. INSTALL REAR NO. 2 WHEEL BEARING DUST DEFLECTOR


    1. A015ZYQE02

      Using SST and a press, install a new rear No. 2 wheel bearing dust deflector to the rear axle carrier sub-assembly.

      SST
      09950-70010   ( 09951-07150 )
      09951-01000

      Tech Tips

      Align the hole for the rear speed sensor in the rear No. 2 wheel bearing dust deflector with the rear axle carrier sub-assembly.

  4. INSTALL REAR AXLE ASSEMBLY

    Tech Tips

    Refer to the procedure from Install Rear Axle Assembly Click here.