REAR DRIVE SHAFT ASSEMBLY INSPECTION


  1. INSPECT REAR DRIVE SHAFT ASSEMBLY


    1. A0160ES

      Check that there is no excessive play in the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial directions of the inboard joint.

    4. Check the boot for damage.

    5. A01626LE05

      Check whether the drive shaft dimensions are within the following specifications.

      Tech Tips

      The following table shows dimension (A) of the drive shaft.

      Reference Dimension (A)
      LH 675.9 mm (26.61 in.)
      RH 721.9 mm (28.42 in.)