TCM REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A015ZFO

      Remove the 9 clips and cool air intake duct seal.

  3. REMOVE ENGINE ROOM SIDE COVER LH (for LHD)


    1. A016120

      Remove the 5 clips and engine room side cover LH.

  4. REMOVE ENGINE ROOM SIDE COVER LH (for RHD)


    1. A015Z63

      Remove the 4 clips and engine room side cover LH.

  5. REMOVE ENGINE ROOM ECU COVER


    1. A01627R

      Remove the 3 bolts and the engine room ECU cover.

      Note


      • Remove all water from on and around the engine room ECU cover.

      • Perform the inspection indoors to avoid rain.

      • Be sure to prevent water intrusion to the ECM (connectors and screw holes).

  6. REMOVE TCM


    1. A015ZYV

      Using a screwdriver, disconnect the connector holder.

    2. Disconnect the 8 connectors.

    3. A015YTZ

      Remove the 2 nuts and TCM.