TRANSMISSION CONTROL SWITCH INSPECTION


  1. INSPECT TRANSMISSION CONTROL SWITCH


    1. A0162HDE04

      Disconnect the transmission control switch connector of the shift lock control unit assembly.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Shift Position Specified Condition
      3 (IG) - 7 (S) M, "+" and "-" Below 1 Ω
      3 (IG) - 7 (S) Except M, "+" and "-" 10 kΩ or higher
      2 (SFTU) - 5 (E) Press continuously "+" (Up shift) Below 1 Ω
      2 (SFTU) - 5 (E) M 10 kΩ or higher
      1 (SFTD) - 5 (E) Press continuously "-" (Down shift) Below 1 Ω
      1 (SFTD) - 5 (E) M 10 kΩ or higher

      If the resistance value is not as specified, replace the transmission control switch.