PATTERN SELECT SWITCH INSPECTION


  1. INSPECT NO. 1 PATTERN SELECT SWITCH ASSEMBLY


    1. A0161JAE01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (E) - 6 (P) Press continuously Pattern select switch (SPORT) Below 1 Ω
      1 (E) - 6 (P) Release Pattern select switch (SPORT) 10 kΩ or higher
      1 (E) - 3 (2ND) Press continuously Pattern select switch (SNOW) Below 1 Ω
      1 (E) - 3 (2ND) Release Pattern select switch (SNOW) 10 kΩ or higher

      If the resistance value is not as specified, replace the pattern select switch.