SHIFT LEVER INSPECTION


  1. INSPECT SHIFT LOCK CONTROL ECU


    1. A0161BSE12

      Measure the voltage according to the values in the table below.

      Tech Tips

      Do not disconnect the shift lock control ECU connector.

      Standard Voltage
      Tester Connection Condition Specified Condition
      7 (STP) - 8 (E) Brake pedal depressed 11 to 14 V
      7 (STP) - 8 (E) Brake pedal released Below 1 V
      1 (IG) - 8 (E) Engine switch on (IG) 11 to 14 V
      1 (IG) - 8 (E) Engine switch off Below 1 V
    2. A0161BSE13

      Measure the resistance according to the value in the table below.

      Tech Tips

      Do not disconnect the shift lock control ECU connector.

      Standard Resistance
      Tester Connection Condition Specified Value
      8 (E) - Body ground Always Below 1 Ω