STARTER DISASSEMBLY


  1. REMOVE STARTER MAGNETIC SWITCH ASSEMBLY


    1. A0162IW

      Remove the nut, and disconnect the lead wire from the magnetic switch assembly.

    2. A015ZW4

      Remove the 2 nuts and starter magnetic switch assembly.

  2. REMOVE STARTER DRIVE HOUSING ASSEMBLY


    1. A0162PK

      Using a T30 "TORX" socket wrench, remove the 2 bolts.

    2. Pull out the starter yoke assembly and the starter commutator end frame assembly together with the stater armature assembly.

  3. REMOVE STARTER COMMUTATOR END FRAME ASSEMBLY


    1. A01632O

      Remove the starter pinion drive lever.

    2. A016208

      Remove the 2 screws and starter commutator end frame assembly.

      Note

      While holding down the lead wire, remove the starter commutator end frame assembly.

  4. REMOVE STARTER ARMATURE ASSEMBLY


    1. A0163FQE02

      Using a screwdriver, hold the spring back and disconnect the brush from the starter brush holder assembly.

    2. Disconnect the 4 brushes, and remove the starter brush holder assembly.

    3. A0162BS

      Remove the starter armature assembly from the starter center bearing clutch sub-assembly.

  5. REMOVE STARTER YOKE ASSEMBLY


    1. Remove the starter yoke assembly from the starter center bearing clutch sub-assembly.

  6. REMOVE STARTER ARMATURE PLATE


    1. A016015

      Remove the starter armature plate from the starter center bearing clutch sub-assembly.

  7. REMOVE PLANETARY GEAR


    1. A016303

      Remove the 3 planetary gears.