STARTER REMOVAL


  1. REMOVE ENGINE AND TRANSMISSION

    Click here.

  2. REMOVE OIL LEVEL DIPSTICK SUB-ASSEMBLY


    1. Remove the oil level dipstick sub-assembly.

  3. REMOVE OIL LEVEL DIPSTICK GUIDE SUB-ASSEMBLY


    1. A01633M

      Remove the bolt and oil level dipstick guide sub-assembly.

    2. Remove the O-ring from the oil level dipstick guide sub-assembly.

  4. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01613Y

      Disconnect the air fuel ratio sensor connector.

    2. Remove the 3 bolts and No. 1 exhaust manifold heat insulator.

  5. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH


    1. A0160GZ

      Remove the 8 nuts and exhaust manifold sub-assembly RH.

    2. A0161MSE01

      Remove the gasket.

  6. REMOVE NO. 3 EXHAUST MANIFOLD HEAT INSULATOR


    1. A0162DT

      Remove the 3 bolts and No. 3 exhaust manifold heat insulator.

  7. REMOVE STARTER ASSEMBLY


    1. A015ZNL

      Detach the 11 claws and remove the terminal upper cover.

    2. A016129

      Disconnect the starter connector.

    3. Remove the nut and disconnect the wire harness.

    4. A015Z0H

      Remove the 2 bolts and starter assembly.

    5. A0160KW

      Remove the nut and terminal lower cover.

    6. A015YK6

      Remove the flywheel housing side cover.