OIL PRESSURE SWITCH REMOVAL


  1. REMOVE ENGINE UNDER COVER

  2. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil pan drain plug and drain the engine oil into a container.

    3. Clean the oil pan drain plug.

    4. Install the oil pan drain plug with a new gasket.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  3. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Disconnect the oil pressure switch assembly connector.

    2. A015YODE01

      Using SST, remove the oil pressure switch assembly.

      SST
      09922-10010