EXHAUST PIPE REMOVAL

CAUTION:


  • Wear protective gloves when removing the exhaust pipe.


  • The exhaust pipe is extremely hot immediately after the engine has stopped.


  • Confirm that the exhaust pipe has cooled down before removing it.


  1. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    1. A0162QN

      Remove the 2 bolts and 2 compression springs.

    2. Remove the tail exhaust pipe assembly from the 6 exhaust pipe supports.

    3. Remove the gasket from the front exhaust pipe assembly.

  2. REMOVE EXHAUST PIPE DAMPER


    1. A0161EI

      Remove the 2 bolts and exhaust pipe damper.

  3. REMOVE NO. 1 FLOOR UNDER COVER

  4. REMOVE NO. 2 FLOOR UNDER COVER

  5. REMOVE REAR NO. 1 FLOOR PANEL BRACE


    1. A015YY2

      Remove the 4 bolts and rear No. 1 floor panel brace.

  6. REMOVE FRONT CENTER FLOOR BRACE


    1. A01637A

      Remove the 4 bolts and front center floor brace.

  7. DISCONNECT HEATED OXYGEN SENSOR


    1. A015ZMNE01

      Remove the grommets of the heated oxygen sensors.

    2. A0160THE01

      Using SST, loosen the heated oxygen sensors, and disconnect the sensors by hand.

      SST
      09224-00010

  8. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01626I

      Remove the 4 bolts, 4 nuts and front exhaust pipe assembly.

    2. Remove the 2 gaskets from the exhaust manifold RH and exhaust manifold LH.