FUEL SENDER GAUGE ASSEMBLY INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A015ZAGE01

      Disconnect the fuel sender gauge connector.

    2. Inspect the fuel sender gauge assembly.


      1. Remove the fuel sender gauge assembly.

      2. Check that the float moves smoothly between F and E.

      3. Measure the resistance between terminals 2 (S) and 1 (FE) of the connector according to the value(s) in the table below.

        Standard Resistance
        Float Level Resistance (Ω)
        F 6.5 to 8.5
        Between E and F 6.5 to 229.6 (Gradually changes)
        E 224.6 to 229.6

        Tech Tips

        If the value is not as specified, replace the fuel sender gauge assembly LH.

  2. INSPECT FUEL SENDER GAUGE


    1. A0160Y3E01

      Disconnect the fuel sender gauge connector.

    2. Inspect the fuel sender gauge assembly.


      1. Remove the fuel sender gauge assembly.

      2. Check that the float moves smoothly between F and E.

      3. Measure the resistance between terminals 1 (FS) and 2 (E) according to the value(s) in the table below.

        Standard Resistance
        Float Level Resistance (Ω)
        F 6.5 to 8.5
        Between E and F 6.5 to 184.9 (Gradually changes)
        E 180.9 to 184.9

        Tech Tips

        If the result is not as specified, replace the fuel sender gauge assembly RH.