FUEL PUMP DISASSEMBLY


  1. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A015ZHFE01

      Disconnect the fuel sender gauge assembly connector from the fuel suction plate sub-assembly.

    2. Press down on the fuel sender gauge assembly claw labeled A. Then slide the fuel sender gauge assembly upward.

      Note

      Do not touch the sender resistance plate or contact area.

  2. SEPARATE FUEL SUCTION PLATE SUB-ASSEMBLY


    1. A01634FE01

      Disconnect the fuel pump connector from the fuel suction plate sub-assembly.

      Note


      • Do not damage the wire harness.

      • Do not separate the tube indicated in the illustration Click here.

    2. A015YMTE01

      Using needle nose pliers, remove the E-ring.

    3. Separate the fuel suction plate sub-assembly and remove the 2 spring from the No. 1 fuel sub-tank.

  3. REMOVE FUEL FILTER


    1. A0163HLE01

      Disengage the 2 claws and remove the fuel filter from the No. 1 fuel sub-tank.

      Note

      Do not separate the tube indicated in the illustration Click here.

  4. REMOVE JET PUMP


    1. A0160XD

      Using a screwdriver with the tip taped, remove the jet pump from the No. 1 fuel sub-tank.

    2. A0160ZXE01

      Remove the O-ring from the jet pump.

  5. REMOVE FUEL PUMP HARNESS


    1. A0161KI

      Disconnect the fuel pump connector from the fuel pump assembly and then remove the fuel pump harness.

  6. REMOVE NO. 1 FUEL SUCTION SUPPORT


    1. A0162DPE01

      Using a screwdriver with the tip taped, disengage the 2 claw and remove the No. 1 fuel suction support.

  7. REMOVE FUEL PUMP ASSEMBLY


    1. A0160HM

      Disengage the 5 claws on the fuel filter and remove the fuel pump assembly from the fuel filter.

    2. A015ZXOE02

      Remove the O-ring and fuel pump spacer from the fuel pump assembly.