FUEL PRESSURE SENSOR REMOVAL


  1. PRECAUTION

    CAUTION:


    • Do not smoke or work near an open flame when handling the fuel system.

    • Keep gasoline away from rubber or leather parts.

    • Do not allow fuel to spray when removing the pipe between the high pressure side fuel pump assembly and the fuel injector assembly. The fuel in the pipe is highly pressurized.

  2. DISCHARGE FUEL SYSTEM PRESSURE


    1. Discharge fuel system pressure Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE INTAKE AIR SURGE TANK ASSEMBLY


    1. Remove the intake air surge tank assembly Click here.

  5. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A0160E4

      Remove the No. 1 engine cover sub-assembly.

  6. REMOVE FUEL PRESSURE SENSOR

    A0161F0E01

    1. Disconnect the connector.

    2. Remove the fuel pressure sensor and gasket.