CYLINDER BLOCK REPLACEMENT


  1. REPLACE STRAIGHT PIN

    Note

    It is not necessary to remove the straight pins unless they are being replaced.


    1. Remove the straight pins.

    2. Using a plastic-faced hammer, tap in new straight pins to the cylinder block.

      A015ZMYE02
      Standard Protrusion
      Item Specified Condition
      Pin A 23 mm (0.906 in.)
      Pin B 11 mm (0.433 in.)
      Pin C 9 mm (0.354 in.)
      Pin D 6 mm (0.236 in.)

  2. REPLACE STUD BOLT

    Note

    If a stud bolt is deformed or the threads are damaged, replace it.


    1. Remove the stud bolts.

    2. Using E8 and E10 "TORX" socket wrenches, install the stud bolts.

      A0162JWE03
      Torque:
      Bolt A
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }
      Bolt B
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }