REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY


    1. A01629JE01

      Using SST, hold the crankshaft.

      SST
      09213-38010
      09330-00021
    2. A01614O

      Remove the 10 bolts, drive plate spacer RR, drive plate and ring gear sub-assembly and crankshaft angle sensor rotor.

  3. REMOVE ENGINE REAR OIL SEAL


    1. Using a knife, cut through the oil seal lip.

    2. A01619FE02

      Using a screwdriver with its tip taped, pry out the oil seal.

      Note

      After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.