AIR FUEL RATIO SENSOR INSTALLATION


  1. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)


    1. A0160TZE01

      Using SST, install the air fuel ratio sensor to the exhaust manifold LH.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Note


      • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.).

      • The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) Click here.

      • The "with SST" torque value is effective when SST is parallel to the torque wrench.

    2. Connect the air fuel ratio sensor connector.

  2. INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)


    1. A015Z1TE01

      Using SST, install the air fuel ratio sensor to the exhaust manifold RH.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Note


      • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.).

      • The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) Click here.

      • The "with SST" torque value is effective when SST is parallel to the torque wrench.

    2. Connect the air fuel ratio sensor connector.

  3. INSTALL ENGINE AND TRANSMISSION


    1. Install the engine and transmission Click here.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note


    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

    • Reset the auto tilt away function setting to the previous condition by changing the customize parameter Click here.