DRIVE BELT INSTALLATION


  1. INSTALL V-RIBBED BELT


    1. A01609IE02

      Install the V-ribbed belt as shown in the illustration.

    2. Rotate the V-ribbed belt tensioner pulley counterclockwise, and then remove the bar.

      Note

      Check that the drive belt is properly set to each pulley.

    3. A015Z08E03

      Check that the belt is properly positioned on each pulley.

    4. Start the engine and check that the belt turns smoothly and no abnormal noise occurs.

  2. INSTALL RADIATOR RESERVE TANK ASSEMBLY


    1. A01637D

      Install the radiator reserve tank assembly with the 2 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

  3. INSTALL NO. 1 AIR CLEANER INLET


    1. A01612G

      Install the No. 1 air cleaner inlet with the bolt and clip.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

  4. INSTALL COOL AIR INTAKE DUCT SEAL


    1. A015ZFO

      Install the cool air intake duct seal with the 9 clips.