CAMSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL CAMSHAFT POSITION SENSOR


    1. A016348

      Install the camshaft position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    2. Connect the camshaft position sensor connector.

  2. INSTALL VVT SENSOR (for Bank 1)


    1. A0160GQ

      Install the 2 VVT sensors with the 2 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    2. Connect the VVT sensor connectors.

    3. A0163AC

      Connect the 3 wire harness clamps.

  3. INSTALL VVT SENSOR (for Bank 2)


    1. A01624E

      Install the 2 VVT sensors with the 2 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    2. Connect the VVT sensor connectors.

    3. A0161RJ

      Connect the wire harness clamp.

  4. INSPECT FOR OIL LEAK

  5. INSTALL V-BANK COVER SUB-ASSEMBLY


    1. A0160IP

      Engage the 4 clips to install the V-bank cover sub-assembly.

      Note


      • Be sure to engage the clips securely.

      • Do not apply excessive force or hit the cover to engage the clips. This may cause the cover to break.