ACCELERATOR PEDAL INSTALLATION


  1. INSTALL ACCELERATOR PEDAL ASSEMBLY (for LHD)

    Note


    • Avoid physical shock to the accelerator pedal assembly.

    • Do not disassemble the accelerator pedal assembly.

    • The accelerator pedal assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal assembly. If applied, the accelerator pedal assembly must be replaced.


    1. A0160NSE03

      Install the accelerator pedal assembly with the 2 nuts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Connect the accelerator pedal assembly connector.

  2. INSTALL ACCELERATOR PEDAL ASSEMBLY (for RHD)

    Note


    • Avoid physical shock to the accelerator pedal assembly.

    • Do not disassemble the accelerator pedal assembly.

    • The accelerator pedal assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal assembly. If applied, the accelerator pedal assembly must be replaced.


    1. A0161GN

      Install the accelerator pedal assembly with the 2 nuts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Connect the accelerator pedal assembly connector.