NAVIGATION SYSTEM (for DVD) Vehicle Position Mark Deviates Greatly

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK GPS MARK


    1. A01619EE01

      Check that the GPS mark is displayed.

      OK
      GPS mark is displayed.

    NG

    GO TO "GPS MARK IS NOT DISPLAYED" IN PROBLEM SYMPTOMS TABLE Click here

    OK

  2. CHECK VEHICLE SENSOR (OPERATION CHECK)


    1. A0160O8

      Enter the "Vehicle Sensors" screen. Refer to Check GPS & Vehicle Sensors in Operation Check Click here.

    2. While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check that these readings are almost equal.

      OK
      The readings are almost equal.

    NG

    CHECK DTC OUTPUT Click here

    OK

  3. CHECK VEHICLE SIGNAL (OPERATION CHECK)


    1. Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check Click here.

    2. A016039

      Check that the display changes between ON and OFF according to the shift lever operation.

      OK
      Shift Lever Position Display
      except R OFF
      R ON

      Tech Tips

      The display is updated once per second. It is normal for the display to lag behind the actual switch operation.


    NG

    CHECK DTC OUTPUT Click here

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here